Yealink SIP-T20 Guide de l'utilisateur télécharger pdf (Page 8)

Enterprise IP Phone Getting Started

Note:

1. If inline power is provided, do not install AC adapter. Make sure the Ethernet cable

and switch/hub are PoE compliant.

2. The Internet Port can be also connected to Hub/Switch/IP PBX or other internet

devices.

The phone can also share the network connection with other network devices such as

PC. Connect the phone’s PC port and computer’s Network Port together using an

Ethernet cable, shown as below:

Configuration and Registration

If you are administrator, you need to do some simple configuration to make the phone

work. If not, please contact with your internet administrator or service provider for

more details.

Configuring via Web Page

Press OK button on the keypad of the phone to enter the status page and find out the

IP address of IP phone. Enter it (for example

http://192.168.3.28) into the address bar

of web browser. The default login name and password are both “admin”.

Note:

Please locate your PC in the same network segment of IP phone (192.168.3.X) to

access the web configuration page. Please consult your system administrator for help.

Network Settings

Choose Network->Internet Port（WAN）.

DHCP: By default the phone attempts to contact a DHCP Server in your network in

order to obtain its valid network settings, e.g. IP address, sub mask, gateway, DNS

server, etc.

Static IP Address: If your phone cannot contact a DHCP Server for any reason, you

need to enter the network settings manually via Static IP Address. Please contact your

internet administrator for more details.

- 4 -

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Pas de commentaire

Yealink SIP-T20 Guide de l'utilisateur Page 8